Products
Products NPC 10000 series
MARKETS » PROTECTIVE » Oil and Gas
The consequent evolution of the studies made on the NPC 9000 storage tanks series bring a new coating solution which inhibit the corrosion with a high performance internal lining that dramatically improves speed and volume of the throughput. Product range comprehends external application systems for buried and unburied pipelines together with internal lining for crude oil, jet fuel, water and all the types of chemical substances. Specific three-layers systems based on polyethylene, applied as an external coating with the O-ring and side band method, are part of our comprehensive offer.
Brochure
NPC 10001
Market:
Type:
Function:
Two components, High solid, surface tolerant Epoxy Primer C5M-High certified. Ideal for new system and maintenance works, excellent adhesion to manually prepared supports, old paints, hot galvanized steel plates and light alloys, iron and sandblasted steel. |
|
NPC 10002
Market:
Type:
Function:
Applicable up to 200 microns on a single coat, this surface tolerant Epoxy Intermediate C5M-High certified is over paintable with several topcoats: one-component and bi-component acrylics, polyurethanes and epoxies. |
|
NPC 10002 Aluminium
Market:
Type:
Function:
High build epoxy finishing with aluminum powder. Excellent corrosion resistant up to C5M-High environment. Usable as single coat or with a primer due to its surface tolerant characteristics. |
|
NPC 10003
Market:
Type:
Function:
A medium-high thickness Polyurethane finishing paint with aliphatic isocyanate hardener is the perfect match with epoxy primer or intermediate coats, as well as with other specific products. |
|
NPC 10004
Market:
Type:
Function:
Primer for a C3 medium corrosive environment, a two-pack Epoxy-polyamide Primer suitable for the external coating of pipelines. Ideal for new system and maintenance works. |
|
NPC 10005
Market:
Type:
Function:
Bi-component Epoxy intermediate, its micaceous iron oxide content assure a higher barrier protection. Perfect for all the C4 H corrosive environments. |
|
NPC 10006
Market:
Type:
Function:
Topcoat Epoxy coating for pipeline internals carrying potable water (250 DFT) according to BS6920. Total reliability and high potable water quality are its main features. |
|
NPC 10007
Market:
Type:
Function:
With a good resistance to abrasion, this high build two component Epoxy topcoat, is designed to withstand a 120 C immersion temperature, with 150 C peaks. |
|
NPC 10008
Market:
Type:
Function:
Mono component liquid Primer based on epoxy and amine resins, drying temperature between 100C and 160C. This external three layers system coating based on polyethylene has an outstanding resistance to cathodic disbondment. |
|
NPC 10009
Market:
Type:
Function:
Solvent free, epoxy Primer specifically developed for pipelines external protection, PE based. Great cathodic disbondment and boiled water resistance together with an excellent corrosion protection. |
|
NPC 10010
Market:
Type:
Function:
This Epoxy topcoat is designed for the internal lining of pipelines carrying a wide range of petrolchemical products including aviation fuel. Excellence adhesion to both blast cleaned and manually prepared surfaces is suitable up to 100 °C in dry service conditions. |
|
NPC 10011
Market:
Type:
Function:
The maximum flow for gas pipelines is guaranteed; this two-component high solids epoxy coating combines enhanced internal lining with an excellent corrosion protection. British Gas CM1/CM2 and APIRP 512 approved. |
|